Discover and purchase or products

SWITCHO RADIOS

Our RADIO Switch Panel is a Plug & Fly simulator module with COMMS (communication), NAV (navigation), ADF, XPDR (transponder), AUTOPILOT, beacon MARKERS, FLAPS and TRIM indicators, DME , complete ANNUNCIATOR PANEL and a tactile AUDIO panel. Make your family grow with our complete SWITCHO Family! Compatible with P3D, XPLANE and MSFS

895,00 805,50 

In Stock

SKU: SWITCHO Radio Category: Tag:

DESCRIPTION

The SWITCHO RADIOS is a desktop radio switch panel or cockpit-panel module with touch screen, designed to be a very complete Radiostack with extra indications. This Radiostack is designed for VFR and IFR flights, both for short-range and long-range aircraft. It includes all communication, radio, and auto-pilot necessary switches and rotaries. The touch screen shows a full annunciator panel, radio, auto-pilot, navigation, and flap and trim indications.

The autopilot is inspired by the design and functionality of both G1000 NXI and Bendix KFC225, seeking for the best of each one to integrate all the available functionalities in all default General Aviation Aircrafts of MSFS, X-Plane and Preapr3D (few limited functionalities in Prepar3D). SWITCHO RADIOS is a Plug & Fly USB module ready to be connected to any computer. Using our “VFHub” software, it is fully compatible and ready to work with the three main flight simulations platforms. It is equipped with a touch screen, showing a full annunciation panel, radio, autopilot, navigation, and flaps and trims indicators.

Currently, cockpits are always 3D, more complex and equipped with multiple systems. This means that the virtual pilot constantly changes the view to visualize the flight parameters in the cockpit and, above all, to act on the various systems of the aircraft (switches, rotaries and levers).

The SWITCHO FAMILY modules provide streamlined access to flight data and aircraft controls, making it easy for pilots to stay informed and in control of their flights through very compact, easy, and ergonomic desktop modules. This is very important in all phases of flight, and is especially important in critical moments such as takeoff, approach, or landing.

All five modules are compatible and can be set up together using our snap system around the aluminum housing. This system can help you grow your SWITCHO family at your own pace.

If you're not looking for a desktop solution but a friendly cockpit builder product, this is for you too. The aluminum housing can be removed in all five modules, and it can be placed directly onto your favorite panel. This solution is perfect for enthusiasts who have bought StayLevel Avionix panels and other similar solutions.

None of the modules require configuration by the end user. They are all Plug&Fly and with USB-C high-end quality connection. Our own VF-HUB software will recognize your module and automatically leave it ready to fly.

FEATURES

  • Plug&Fly product, no configuration is required.
  • FULL metal construction.
  • Rotaries & switches with a ultra-high life cycle.
  • It includes anti-slip systems for a better grip over any surface.
  • It includes anti-tip systems to avoid any tilt and keep in a steady vertical position.
  • Realistic feel thanks to the quality of the materials, strong and reliable rotational encoders.
  • Designed for Single &Twin engine Piston and Turboprop aircraft.
  • Designed for IFR and VFR flights, both for short-range and long-range aircraft.
  • The entire housing is removable so that the module can be fitted in any cockpit panel by means of 8 screws.
  • 1024x600 touch screen resolution, with draggable screen to show you an operative AUDIO panel.
  • Tactile AUDIO panel.
Module content:
  • In the Screen:

Nav1, Nav2, Comm1, Comm2, ADF, XPDR DME-1, DME-2

- AutoPilot (very complete)

- Independent Landing Gear indicator for each wheel

- Marker Beacon Lights (O, M, I)

- Flaps

– Gear

– Trim indicator (x3)

- Annunciator panel with unlimited number of alarms with display order according to the severity of the alarm

  • Switches & Rotaries:

- Nav1, Nav2, Comm1, Comm2, ADF, XPDR

- Very complete Autopilot: AP, YD, FD, A/T, FLCLVL CHG, VS UP, VS DN, HDG, NAV, VNAV, APR, REVB/C, ALTw/ Rotary, VS

- Rotaries to adjust navigation indications & Auto Throttle: CRS1w/ CTR, CRS2w/CTR, HDGw/Sync, GYRO, BAROw/baro STD, IAS(IAS OR MACH)

TECHNICAL SPECIFICATIONS

  • Product Dimensions (with packing): L 345mm / W 290mm / H 230mm
  • Product Weight (with packing): 3 Kg
  • Connectivity: USB (cable included)

Software Compatibility

Prepar3D v4-5*

OK

X-Plane 11*

OK

MSFS*

OK

OS Compatibility

WINDOWS

OK

MacOS

KO
* Virtual Fly ensures all of our products are fully compatible with default aircraft of the corresponding software. Please note that our products may not be fully compatible with all third-party aircraft, add-ons and plugins, and the use of such may interfere with the operation of our software. If you experience any issues with the software, please contact our support team for assistance. 

TECHNICAL CUTOUTS

SWITCHO radios | technical cutout

MEDIA CONTENT

All kind of media from our products.

We put at your disposal next videos. More videos in our youtube channel

ACCESSORIES

The following accessories are avaiable for this product.

  • SWITCHO CLAMP

    Two clamping jaws for the SWITCHO. Clamp for desks up to 42mm (1,661 inches)

    30,00  Add to cart

RELATED PRODUCTS

CONTACT WITH VIRTUAL FLY

If you have any questions please fill the form below and we will answer as soon as possible.

For technical questions please contact our Technical Service Team through our specific Contact Form

    Full Name (*)

    E-mail (*)

    Telephone (*)

    Country (*)

    Profile (*)

    Where did you hear about us? (*)

    Interest (*)

    Message

    By sending my personal information I confirm that I have read and accept the privacy policy