In Stock

The ATD that meets the FAA requirements for Basic Aviation Training Device. For those not needing an ATD but looking for a professional equipment.

Flight Panel. Single seat. General Aviation. Single engine.

SOLO PRO is the same flight panel Virtual-Fly includes in its SOLO Station PRO simulator which is produced to meet and exceed F.A.A. requirements for Basic Aviation Training Device level.

SOLO PRO is the solution for those people and businesses who want to enjoy the realism, technology and capabilities of a professional flight training equipment when logging hours on the pilot´s book is not required.

This product is also part of a Basic Aviation Training Device certified by the U.S. Federal Aviation Administration (F.A.A.).


For shipping to Canada please contact sales at [email protected]
visit our downloads page


Did you ever wanted to get the real equipment used by Student-Pilots and Flight Instructors? Now you can. SOLO PRO is the very same flight panel used by Virtual-Fly for meeting and exceeding FAA BATD requirements.


It is that easy. Double click on the driver you will find on a PenDrive when unboxing and both computers, yours and SOLO´s, will communicate each other and set up all you need to start flying. No IT tasks from you. No DIY. Just Plug&Fly.


SOLO PRO works with a SSD processor inside in order to increase the realism and satisfaction of your experience because:
It does not consume resources from the computer where you have MSFS, X-Plane or Prepar3D installed.
It generates higher resolution and fluidity of graphics on the indicators and better frames per second ratio on the Flight Simulator experience
It allows direct connection through Internet between your DUO Flight Panel and the manufacturer in case you need technical assistance.


Robust, Reliable and Realistic
Virtual-Fly product´s durability is a lifetime commitment. We produce Robust, Reliable and Realistic hardware that does not need any IT or DIY tasks from your side in order to active, start-up and enjoy its full performances.
  • Characteristics
  • Advantages
  • Technical Descript.
  • Technical Requirements

Just by pressing a button you can select up to 4 panels: Cessna 172, Cessna 182, Mooney M20J and Generic. Using the generic Start-up engine key and authentic ALT BAT set from a real aircraft.

This Flight panel is identical to the equipment the one Virtual-Fly integrates in its SOLO Station PRO F.A.A. approved training Device that meets & exceeds the requirements for Basic Aviation Training Device (B.A.T.D.)

4 panels in 1:
- Cessna C-172
- Cessna C.182RG
- Mooney Bravo – M20J
- Generic panel for any single-piston engine aircraft.

Option, you can select 3 scaled backdrops for the IAS 200,400 and 600 knots and the type of direction indicator: Gyro or HSI.

- Power line
- Power Supply a 110–230 VAC


Plug&Fly technology:
Connect a network cable to your MFS/X-Plane/Prepar3D computer, install a driver and take off to the skies!

Processor included to handle all of the indicators on the aircraft’s panel and Radiostack with a high ratio of frames per second. You will be able to use your MFS/X-Plane/Prepar3D’s resources solely for the scenarios.

Simple installation:
Only a few minutes are needed.

Price includes remote assistance to aid with set-up.

Technical Descript. / Instruments

Weight: 25Kg.

Dimensions: 49cm. (Height) X 23cm. (Length) X 85cm. (Width)


Lights panel: Beacon, Landing Taxi, Nav., Strobe.

Indicators: IAS, attitude, altimeter, turn coordinator, Gyro-directional, HIS, climb rate, VOR1, VOR 2, ADF, engine parameters, fuel level, compass. Backlight information panel, flaps position, elevator and rudder trim position, clock / chronometer.

Radiostack: audiopanel, marker lights, automatic pilot (with Flight Director), comm1, comm2, nav1, nav2, DME, ADF with decimals, transponder.

Ignition panel: 5 positions ignition key (off, R, L, both, start), alternator, battery, master avionics.

Switches: parking brake, flaps control, elevator trim wheel, fuel tank selector, cowl flaps, fuel pump, Pitot heat, carburetor heat, landing gear lever: with one red light for “In Trans” and three green lights for “Gear Down & Locked”.

Technical Requirements

Minimum requirements:
Computer with Microsoft Flight Simulator installed, suitable for versions MSFS, X-Plane and Prepar3D, with conventional network data input. RJ45 (LAN).
Power outlet 110–230 VAC, 50–60 Hz.

Recommendable requirements:
Flight controls: 1 Yoke + 1 complete set (Throttle, Propeller, Mixture) and 1 set of rudder pedals.
Power outlet 110–230 VAC, 50–60 Hz.

Other specifications:
Transport not included. Applicable fees or duties not included.

MSFS, X-Plane, Prepar3D v1-v5..


How is remote assistance requested?

By sending an email to [email protected] and indicating your issue. Our technical support staff will provide you with instructions for working ONLINE.

How long is the warranty period for Virtual-Fly products?

Virtual-Fly is compliant with international legislation in force: 1 year for repair work and materials, and a further year solely for materials.

Does the control panel come fully assembled?

Yes, no extra assembly tasks are required.

What exactly is plug&fly technology?

All of the panels belonging to the SOLOFlightPanel and DUOFlightPanel family work with an internal computer. These computers connect to a MFS-Prepar3D via a network cable, no type of video cable or USB is needed.

Must I execute any driver on the computer that runs MFS/Prepar3D?

Yes, this is a small driver (communications plugin) which is supplied on a portable memory drive.

Must I have FSUIPC installed?

Yes, our panels work with both the free version as well as the paid version of FSUIPC. If you do not have either of the two, the free version will be supplied on a portable memory drive.

I do not know how to set up a computer network, will this cause me any problems in terms of start-up?

Not at all, our plugin recognises the computer that is on the network with MFS-Prepar3D and automatically connects. Should a connection not be successful, Virtual-Fly’s technical support team will connect remotely to activate your panel at no cost.

How can I select the instruments panel according to the aircraft type?

This is very simple. You only have to press on combination of keys on the panel.

Why is an internal computer included?

The internal computer carries out all of the functions of the instrument panel, along with the visualisation and movement of the instruments. For this reason, your computer with MFS can use all of its resources for the simulator’s scenarios.

With which aircraft is it compatible?

Our panels are compatible with all MFS-Prepar3D aircraft. However, there is a large family of manufacturers of ADDONS whose products we have tested and shown they work, e.g. CARENADO (100%).

What happens when I buy it?

Virtual -Fly starts working when the payment by bank transfer, Pay Pal or credit card is received. At that time, we pack the requested unit and sent directly to the customer’s home or manufacture it in the case of not having stock.

How to know when it will get my product?

The production and delivery deadlines are updated and specified in the budgets made with our sales department and the Web-Shop. Once the product is shipped you can ask for the tracking number that informs you on real time about where the product is and when will it arrive to you.

What do I do when they deliver it to me?

Open the box and check that it’s there and the product´s unit is in perfect condition. If there is any damage to the box or the product, you must notify the shipping company’s employee to pursue the pertinent claim. Then follow the steps in the Instruction Manual or call us if you have any questions or queries.

Additional information

Weight 25 kg
Dimensions 61 × 100 × 38 cm

You may also like…


Technical Support Form

If you have any questions please fill the form below and we will answer as soon as possible.

    Full Name (*)

    E-mail (*)

    Telephone (*)

    Country (*)

    Profile (*)

    Where did you hear about us? (*)

    Interest (*)


    By sending my personal information I confirm that I have read and accept the privacy policy

    Head Office:

    C/ Morales, 39 bajos
    08029 Barcelona – España

    Research & Development Center – Showroom

    C/ Maria Aurelia Capmany, 29
    Pol. Ind. La Fábrica
    08297 Castellgalí – España
    Tel. +34 93 833 33 01
    [email protected]


    In the name of the company VIRTUAL FLY, S.L.U., owner of the web domain and by virtue of what is established in the General Data Protection Regulation (EU 1679/2016) we inform you that we treat the information you provide in this form in order to be able to make your request for information effective. The data provided will be kept while your application is being processed and answered. You have the right to obtain confirmation of whether VIRTUAL FLY, S.L.U. We are treating your personal data so you have the right to access your personal data, rectify the inaccurate or request its deletion when they are no longer necessary.