SOLO Station PRO


In Stock

Our BATD certified by the FAA. Flight Panel, PC, Screen and all Flight Controls, everything you need to get tohse hours in you Logbook. Check it out.

FAA Approved Training Device. Single seat. General Aviation. Single engine. Super Duty Equipment. Virtual-Fly has a triple commitment with flight training and it is based on reliable, robust and realistic approved devices that guarantee thousands of flight training hours in order to assure higher cost-effectiveness for flight schools.

Wasn't it all about realism? Or is it just about logging hours on the pilot´s book? Virtual-Fly wants Student-Pilots to experience a superior look & feel on our approved training devices in order to improve their motivation towards the flight training and thus increase their implication during the learning process and satisfaction for better results.

For shipping to Canada please contact sales at [email protected]
visit our downloads page


It took us 5 years to design and develope this product. And we wanted to start by the basics. There is today a glass-cockpit fever but much of the General Aviation fleet still have analog panels. What would you do with no GPS? Do you know to use a VOR, NBD on IFR. Keep your analogue pilot skills proficient!


Wasn't it all about realism? Or it is just about logging hours on the pilot´s book? Virtual-Fly wants Student-Pilots to experience a superior look & feel on our ATDs in order to improve their motivation towards the flight training and thus improving their implication on the learning process and satisfaction.


Is the name Virtual-Fly gives to its Technical Support and Customer Service for professionals and training companies. We will be there. On the phone, by emails, during Teamviewer sessions, offering technical training, customized solutions, technical visits...whatever it takes, we don´t leave anybody behind.


Robust, Reliable and Realistic
Virtual-Fly product´s durability is a lifetime commitment. We produce Robust, Reliable and Realistic hardware that does not need any IT or DIY tasks from your side in order to active, start-up and enjoy its full performances.
  • Characteristics
  • Advantages
  • Technical Descript.
  • Technical Requirements

F.A.A. approved training device that meets and exceeds the requirements specified on AC 61/136A for the Basic Aviation Training Device level (B.A.T.D.).

The product includes - Hardware:
- Instrument panel
- Yoke
- Throttle quadrant
- Rudder pedals
- System computer
- System display
- Instructor station display
- Instructor station keyboard and mouse
- Sound system
- Monitor stand
- Desktop switch

The product includes - Software:
- Main Computer Operating System, Windows7
- Flight Panel Operating System, Windows7
- Flight Simulation Engine, Prepar3D v.2.
- Instructor Station Software (I.O.S.)
- Flight tracking mapping application, Google Earth

The product includes - Documentation:
- Qualification Approval Guide (Q.A.G.)
- Assembly manual
- Operating manual
- Integrated Ground & Flight IR curriculum
- Start up and shut down manual
- Aircraft instruments & performance data
- Aircraft checklists & performances charts


Robust, reliable and realistic flight simulation station.

Flight simulator station specifically made for approved flight training and practicing on single engine General Aviation airplanes with analogue cockpit.

Easy to install. No IT or DIY tasks required

1 year warranty on materials and 2 years on equipment

Detailed product documentation. 7 manuals

Processor included inside the flight panel in order to manage all indicators, gauges and radiostack fluidly. High frames-per-second ratio.

Included on price: full customer assistance & technical support if necessary. Virtual-Fly´s technical team can access to your SOLO STATION PRO through internet remote control session for start-up and activation of the simulator.

Technical Descript. / Instruments

Flight panel weight: 25Kg.

Flight Panel dimensions: 49cm. (Height) X 23cm. (Length) X 85cm. (Width)

SOLO STATION PRO weight: 41Kg.

SOLO STATION PRO Aprox. dimensions: 85cm. (Height) X 85cm. (Length) X 115cm. (Width)

4 flight panels in 1:
- Cessna C-172
- Cessna C-182 RG
- Mooney Bravo – M20J
- Generic panel for any single-piston engine aircraft. Just by pressing a button you can select 4 panels: Cessna 172, Cessna 182, Mooney M20J and Generic. Using the generic option, you can select 3 scaled backdrops for the IAS 200, 400 and 600 knots and the type of direction indicator: Gyro or HSI.


Lights panel: Beacon, Landing Taxi, Nav., Strobe.
Indicators: IAS, attitude, altimeter, turn coordinator, Gyro-directional, HSI, climb rate, VOR1, VOR 2, ADF, engine parameters, fuel level, compass. Backlight information panel, flaps position, elevator and rudder trim position, clock / chronometer.
Radiostack: audiopanel, marker lights, automatic pilot (with Flight Director), comm1, comm2, nav1, nav2, DME, ADF with decimals, transponder.
Ignition panel: 5 positions ignition key (off, R, L, both, start), alternator, battery, master avionics.
Switches: parking brake, flaps control, elevator trim wheel, fuel tank selector, cowl flaps, fuel pump, Pitot heat, carburetor heat. Landing gear lever: with one red light for “In Trans” and three green lights for “Gear Down & Locked”.
Technical Requirements

- Power line
- Power Supply at 110–230 VAC

Other specifications:
Transport not included. Applicable fees or duties not included


What is the purpose of the certificate simulator SOLO STATION PRO?

Provide a specific and complete training in Analogue single piston engine aircraft both for VFR and IFR conditions.

What can a flight school or aviation training centre do with SOLO STATION PRO?

Learn, refresh and practice Analogue flight skills & procedures. With SOLO STATION PRO, the flight schools and training centres can provide higher added value to its customers, no matter if they are Pilots or Student-Pilots, by offering a robust, reliable and realistic Approved Training Device (ATD) specifically prepared for the VFR and IFR Analogue procedures.

What legislation applies to the use of a simulator certificate as the ONLY STATION PRO?

It depends on the country you want to operate the simulator. In the US, the Federal Aviation Administration sets out its rules in AC 61 / 136A of November the 17th 2014. This link can lead you to the document on the official website.

How many flight hours can a Student-Pilot log in the pilot-book using the SOLO STATION PRO during his/her aeronautical training?

This is an excerpt from the official text (AC 61/136A) that specifies the hours that can be logged in the pilot-book:
“The FAA will approve a BATD meeting the criteria found in this appendix for:

Not more than 10 hours toward instrument rating flight instruction time under part 61, § 61.65(e)(2);
Not more than 10 hours toward instrument rating flight instruction time under part 141, appendix C;
Use in performing instrument recency of experience requirements of § 61.57(c)(1);
Not more than 2.5 hours of training permitted under § 61.109(k)(1) in the introduction to the operation of flight instruments, except as limited by part 141 appendices; and• The flight experience allowance for the use of a BATD and the flight experience allowance for an AATD, an FTD or a flight simulator towards obtaining an instrument rating may be combined. However, that combination may not exceed that allowed under § 61.65 (20 hours maximum) and may not exceed that allowed under part 141, appendix C, paragraph 4(b)(4) (50 percent maximum) of the required training.
NOTE: A part 141 certificated pilot school must obtain a specific authorization for the use of the ATD as part of that pilot school’s approved training curriculum. This authorization must come from the FAA FSDO assigned to that pilot school.”

How do our customers receive the SOLO STATION PRO?

The customer receives a set of packages accompanied by 7 manuals. One of these manuals is the Assembly Manual where you can follow the steps to open the boxes, remove the different components of the simulator (panel, computer, media, controls…), place them and connect them.

How the simulator is switched on only STATION PRO first time?

As you will do from that day on. Switch on the main computer, its monitor and the flight panel. Once they are all on, simply double click on the driver made by Virtual-Fly on the main screen´s desktop and is ready for immediate use.

With which aircraft is it compatible?

SOLO STATION PRO is prepared and approved to fly General Aviation single piston engine airplanes. SOLO STATION PRO holds its Basic Aviation Training Device approval on 3 aircraft models: Cessna C172, C182RG and Mooney Bravo M20J.

How is remote assistance requested?

By sending an email to [email protected] and indicating your issue. Our technical support staff will provide you with instructions for working ONLINE.

How long is the warranty period for Virtual-Fly products?

Virtual-Fly is compliant with international legislation in force: 1 year for repair work and materials, and a further year solely for materials.

Does the control panel come fully assembled?

Yes, no extra assembly tasks are required.

What exactly is plug&fly technology?

All of the panels belonging to the SOLOFlightPanel and DUOFlightPanel family work with an internal computer. These computers connect to Prepar3D via a network cable, no type of video cable or USB is needed.

Must I execute any driver on the computer that runs Prepar3D?

Yes, this is a small driver (communications plugin) which is supplied on a portable memory drive.

I do not know how to set up a computer network, will this cause me any problems in terms of start-up?

Not at all, our plugin recognises the computer that is on the network with Prepar3D and automatically connects. Should a connection not be successful, Virtual-Fly’s technical support team will connect remotely to activate your panel at no cost.

How can I select the instruments panel according to the aircraft type?

This is very simple. You only have to press on combination of keys on the panel.

Why is an internal computer included?

The internal computer carries out all of the functions of the instrument panel, along with the visualisation and movement of the instruments. For this reason, your computer with Prepar3D can use all of its resources for the simulator’s scenarios.

Additional information

Weight 141 kg
Dimensions 107 × 107 × 97 cm


Technical Support Form

If you have any questions please fill the form below and we will answer as soon as possible.

    Full Name (*)

    E-mail (*)

    Telephone (*)

    Country (*)

    Profile (*)

    Where did you hear about us? (*)

    Interest (*)


    By sending my personal information I confirm that I have read and accept the privacy policy

    Head Office:

    C/ Morales, 39 bajos
    08029 Barcelona – España

    Research & Development Center – Showroom

    C/ Maria Aurelia Capmany, 29
    Pol. Ind. La Fábrica
    08297 Castellgalí – España
    Tel. +34 93 833 33 01
    [email protected]


    In the name of the company VIRTUAL FLY, S.L.U., owner of the web domain and by virtue of what is established in the General Data Protection Regulation (EU 1679/2016) we inform you that we treat the information you provide in this form in order to be able to make your request for information effective. The data provided will be kept while your application is being processed and answered. You have the right to obtain confirmation of whether VIRTUAL FLY, S.L.U. We are treating your personal data so you have the right to access your personal data, rectify the inaccurate or request its deletion when they are no longer necessary.